Machines and equipment for the machining of sheet metal, pipes, sections, wire and metal structural work. Dies. Welding. Treatments and finishing. Subcontracting. Robots, automation and enabling technologies.
ORGANISER
CEU-CENTRO ESPOSIZIONI UCIMU

FOR INFORMATION
LAMIERA c/o CEU-CENTRO ESPOSIZIONI UCIMU SPA
Viale Fulvio Testi 128, 20092 Cinisello Balsamo Milano (Italy)

Tel. +39 0226255230/861
lamiera.esp@ucimu.it
Company data
The following data will be published in the Official Exhibition Catalogue
Fill in both fields
Fill in both fields
Invalid email address
Invalid website
Enter the VAT number / TIN without the Country code Invalid VAT number
Invalid email address
ATTENTION: in case of VAT exemption, ex art. 8 - 8bis - 9 DPR 633/72, attach 3 declarations of intent: one headed to CEU - CENTRO ESPOSIZIONI UCIMU SPA, one headed to FIERA MILANO SPA and one headed to TIM for the billing of any additional services.
Field required
15 characters Value not valid: the length must be 15 characters
10 characters Value not valid: the length must be 10 characters
6 characters Value not valid: the length must be 6 characters
Invalid email address
7 characters Value not valid: the length must be 7 characters
Invoice address [1]
Field required
Enter the VAT number / TIN without the Country code Invalid VAT number
Shipping address [2]
Field required
Person in charge for the exhibition
Fill in both fields
Invalid email address
The email and confirm email do not match
Fill in both fields
Contact person of the exhibitor for the exhibition safety (RSE)
Field required
Fill in both fields
Invalid email address
The email and confirm email do not match
Fill in both fields
RSPP (Safety assurance manager in the company)
Field required
Fill in both fields
Invalid email address
The email and confirm email do not match
Fill in both fields
Legal representative
Field required
Fill in both fields
Invalid email address
The email and confirm email do not match
Fill in both fields
Remarks
[1] To be completed only if the invoice must be made out to a company name other than that indicated above. You must send an acceptance declaration signed by the billing customer.
[2] To be completed only if the documentation has to be sent to an address different from the one indicated above.
IVASS Regulation
Field required
General Regulation
Field required
Technical Regulation
Field required
Raised platforms regulation
Field required
Privacy
As per article 42 of the General Rules, the undersigned Company, in accordance with and for the effects of articles 6, 7 and 13 of Regulation (EU) 2016/679 (General Data Protection Regulation), declares to have read and understood the Information Notice of CEU-CENTRO ESPOSIZIONI UCIMU SPA concerning the processing of personal data provided by filling in the present application form, being fully informed of the rights stated in such document and knowing how and where to exercise them, and
- express its consent for the processing of personal data for purpose b) of the information notice, art. 42 of General Rules (direct marketing)
Field required
- express its consent for the processing of personal data for purpose c) of the information notice, art. 42 of General Rules (transmission of personal data to Third Parties for marketing activities
Field required
Stand requirements
(without any engagement on the part of the Organizer)
Min. 16.00 sqm
Invalid size
Field required
Exhibition category
  • A.00.00 METAL FORMING MACHINE TOOLS
  • B.00.00 OTHER MACHINE TOOLS
  • C.00.00 OTHER MACHINES
  • D.00.00 TOOLING
  • E.00.00 PARTS, COMPONENTS
  • F.00.00 MANUFACTURING AND PROCESS AUTOMATION
  • G.00.00 METROLOGY AND QUALITY CONTROL
  • H.00.00 TECHNICAL SUBCONTRACTING
  • I.00.00 SERVICES
Field required
Company activities
Field required
Number of represented companies
Participation fees
According to General Rules article 10, the participation fees are the following:

€ 265 admission fee

Participation fee, “Early Bird” discount, within November 30, 2020:
- € 200/sq.m for exhibition surfaces up to 100 sq.m
- € 185/sq.m for exhibition surfaces from 101 and 200 sq.m
- € 169/sq.m for exhibition surfaces exceeding 200 sq.m

Participation fee starting from December 1, 2020:
- € 215/sq.m for exhibition surfaces up to 100 sq.m
- € 199/sq.m for exhibition surfaces from 101 and 200 sq.m
- € 182/sq.m for exhibition surfaces exceeding 200 sq.m

Increase of 10% for stand with 2 open sides, increase of 15% for stand with 3 open sides, increase of 20% for stand with 4 open sides

Services fee:
€ 8,35/sq.m including standard cleaning, equipment of fire-extinguishers, municipal advertising tax, installed electric power up to 10kW, WI-FI connection in the hall, parking cards, royalties as per General Rules art. 10.2

€ 200 for each exhibited company (only for agents, representative, branches, dealers)
Advance payment
After having carefully examined the articles 7, 10 and 11 of the General Rules, the undersigned Company pays as down-payment:
Payment methods accepted
The application form must be fully filled out and sent together with a copy of the bank transfer to:
UNICREDIT SPA - CORP. OPERATIONS CUSTOMER CARE ITALY - 00153 ROMA
IBAN: IT44 D 02008 05364 000004593617 - BIC CODE UNCRITMMXXX
headed to: FIERA MILANO SPA, Piazzale Carlo Magno 1, IT - 20149 Milano MI VAT IT13194800150
reason: LAMIERA 2021 - Inscription
Field required
Catalogue entry
Enter without legal form suffix
Index of products
  • A.00.00 METAL FORMING MACHINE TOOLS
    • A.01.00 Sheet metal cutting machines
    • A.02.00 Sheet metal blanking, punching machines
    • A.03.00 Sheet metal forming machines
    • A.04.00 Sheet metal working cells and systems
    • A.05.00 Presses
    • A.06.00 Presses for special applications
    • A.07.00 Bar, section and tube working machines
    • A.08.00 Wire forming machines
    • A.09.00 Machines for the production of bolts, nuts, screws and rivets
    • A.10.00 Metal forming (massive) and extrusion machines
    • A.11.00 Deburring and chamfering machines
    • A.12.00 Electrochemical machining
    • A.13.00 Machines for marking and engraving
  • B.00.00 OTHER MACHINE TOOLS
    • B.14.00 Drilling machines
    • B.15.00 Tool grinding machines
    • B.16.00 Gear cutting and finishing machines
    • B.17.00 Sawing and cutting-off machines
    • B.18.00 Screwing and threading machines
  • C.00.00 OTHER MACHINES
    • C.19.00 Micro machining
    • C.20.00 Welding machines and equipment
    • C.21.00 Heat treatment equipment
    • C.22.00 Machines and systems for use in surface technology
    • C.23.00 Machines, systems and materials for additive manufacturing and 3D printing
  • D.00.00 TOOLING
    • D.24.00 Cutting tools
    • D.25.00 Forming tools
    • D.26.00 Abrasive tools and products
    • D.27.00 Handheld tools
    • D.28.00 Tooling devices
    • D.29.00 Tool presetters and tool balancing
    • D.30.00 Workholding
    • D.31.00 Dies
    • D.32.00 Components for dies and moulds
  • E.00.00 PARTS, COMPONENTS
    • E.33.00 Mechanical components
    • E.34.00 Hydraulic and pneumatic components
    • E.35.00 Electrical and electronic equipment for machine tools
    • E.36.00 Control and drive systems
    • E.37.00 Lubrication and cooling
    • E.38.00 Devices for processing waste disposal
    • E.39.00 Safety and health at workshop environment
    • E.40.00 Workshop equipment
  • F.00.00 MANUFACTURING AND PROCESS AUTOMATION
    • F.41.00 Workpiece and tool handling
    • F.42.00 Automation for storage and transportation
    • F.43.00 Assembly
    • F.44.00 Industrial robots
    • F.45.00 Software for product development
    • F.46.00 Software for machines
    • F.47.00 Software for manufacturing
    • F.48.00 Computers and peripherals
  • G.00.00 METROLOGY AND QUALITY CONTROL
    • G.49.00 Measuring instruments
    • G.50.00 Measuring machines and accessories
    • G.51.00 Testing
    • G.52.00 Machines and apparatus for non-destructive testing
    • G.53.00 Artificial vision
    • G.54.00 Quality control, software
    • G.55.00 Technologies for digital factory
  • H.00.00 TECHNICAL SUBCONTRACTING
    • H.56.00 Treatment, disposal and recycling of materials
    • H.57.00 Metal forming machining
    • H.58.00 Assembling and joining
    • H.59.00 Heat treatments